Instructions

Wood and water don't mix

The foundation of this project, on which all dimensions are based, is a plastic tray that contains the water. Making wood hold water is difficult. It's easier to use a plastic container, and conceal it using stone-much like a pond liner.

The plastic container listed was purchased at a local garden centre, but if you can't find this particular item, substitute another container of similar proportions and adjust the other part sizes to suit.

Work from the bottom up

Cedar fence boards are the raw material for the bottom box and top frame members. Rip these to width now, then crosscut to length. Assemble the bottom box with biscuit-reinforced butt joints and polyurethane glue. The mitred top frame is assembled with just glue initially. Once the glue has cured, plunge a couple of slots across the joints and insert glue-coated biscuits into the back of each mitred corner. Once they're dry, cut and sand the protruding biscuits flush. Brush on a few coats of Circa 1850's Tung 'n Teak Oil to protect the wood from moisture.


Export date: Sun Oct 24 3:30:05 2021 / +0000 GMT

This page was exported from Canadian Home Workshop [ https://staging.canadianhomeworkshop.com ]